Quick Prep Plus Interior Prep Coat

Quick Prep Plus is suited for use on interior drywall and may be applied in spray or roller application. Quick Prep Plus is specifically formulated for use in lieu of skim coat of joint compound and to uniform porosities between gypsum board face paper and joint compound.

Technical Information

Installation

Application

• Mix by stirring. Thinning is optional. May be thinned with one pint of water per five gallons.
• Maintain minimum air temperature of 55°F (10°C) degrees during application until completely dry.
• Product should be applied to walls first to eliminate fallout on the sanding fuzz. While the wall is wet, spray the ceilings so the fallout will soak into wet material.
• Apply with airless sprayer with minimum pump capacity of one gallon per minute.
• Suggested tip size range from 0.023 to 0.031.
• May also apply with 1/4", 3/8" to 1/2" nap roller.
• Sanding is optional. Easily sands with 180 to 220 screen or film back to achieve plaster like finish.
• Do not allow product to freeze. Product will not recover.