Order Direct
(602) 323-2807
Delivering the tools to build Arizona since 1983.
about
Videos
products
Manufacturers
locations
contact
HOME
PRODUCTS
MANUFACTURERS
LOCATIONS
ABOUT
CONTACT US
BROWSE CATEGORIES
> Bolt
> Nail
> Nut
> Screws
> Staple
> Washer
Abrasives
Access Doors | Vents | Roof Access
Adhesives | Sealants | Tape
Air & Pneumatic Tools
Automotive | Fleet | Vehicle Maintenance
Cleaning | Waste Removal | Waste Storage
Concrete and Asphalt Chemicals
Concrete and Asphalt Products
Concrete Forming
Diamond Products
Doors and Windows
Drill Bits and Drilling Accessories
Drywall | Ceiling | Wall Panels
Electrical Products and Equipment
Equipment
Erosion Control | SWPPP
Fasteners | Anchors
Fastening Pins & Inserts
Flooring
Food Service
Hand Tools
Hardware Supplies
Hospitality
Industrial Pumps
Industrial Raw Materials
Ladders | Platforms | Scaffolding
Leveling | Measuring | Surveying
Lifting Equipment
Lighting Supplies
Lubrication | Oils | Grease
Lumber Products
Machining Supplies
Masonry
Material Handling | Storage | Containment
Outdoor Products
Paints | Equipment | Supplies
Power Tool Accessories
Power Tools
Presses & Shop Equipment
Safety Equipment and Products
Saw Blades
Shop Vacuums
Sports Drinks and Thirst Quenchers
Strapping
Structural Hardware
Strut, Channel, & Fittings
Tiles and Detectable Warning Pads
Tool Storage | Job Site Boxes | Truck Boxes | Transfer Tanks
Waterproofing Products
Welding Products and Equipment
Home
/
Categories
/
Drill Bits and Drilling Accessories
/
Coring Bits
/
Search:
Core Bit 1-1/2 in.
48-20-5025
Milwaukee
Milwaukee Core Bit 1-1/2 in. 48-20-5025
(click image to enlarge)
Quick Overview
1-1/2 in. diameter
Usable cutting depth 3 in.
Thin wall
Use with SDS core bit shank 48-03-3545 (8 in.) or 48-03-3551 (12 in.)
Interested in this item or want more information?
Monday – Friday 6:00am - 4:30pm
Phone: 602-323-2807
Email:
sales@constructiontoolaz.com
Can't find what you want? Give us a call and we can help you find it.
Details
Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The inside core must be removed by the operator before deeper drilling can be accomplished. The Thick Wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 inch extension is available to allow for the deeper holes to be drilled. The appropriate (dependant on the diameter) SDS Plus Drive Shank must be used to drive the Core Bit. Use 48-20-6150 Center Pin and 48-20-6153 Guide Plate for positioning and starting the hole. Thin Wall Core Bits are available from 1 inch to 6 inch diameters. See Thick Wall Core Bits for cured concrete and/or larger hammers.
Additional Information
Manufacturer: Milwaukee
For More Information on the Core Bit 1-1/2 in.,
[Click Here]
to Link to Manufacturer Web Site
Search:
© Construction Tool & Supply | All Rights Reserved
Powered by 48ws.com